Dietpi.com

They have images for all sorts of devices, and for virtualization platforms (I run mine in VMware).

I ran a different one once before (built a Linux VM, installed Pi), this one was much easier, and it just works.

Oh, Syncthing? It could definitely do this, I’ve had it happen.

Once files are deleted, ST will have the deletion in it’s database. You can recreate the files all you want, ST is going to delete them.

Is the SMB share set read-only?

This is a strange one.

Lol. I feel your pain.

I setup a 2.5TB RAID box in 2011, thought it was going to last a while.

Now my server has a single 8TB data drive, my NAS is 7TB, and I have 2 4TB drives and everything is replicated between them.

Now I need to build another NAS as all this stuff is aging.

Cool, thanks!

I’ve had the opposite experience with Mikrotik.

I really wanted to like it, but (I say this as a former Cisco instructor) their approach to UI and documentation is terrible (the docs don’t tell you what’s what, just tell you how to setup a specific config, without explaining what they’re doing or why, even worse, they start numbering their eth interfaces from 1 - it took me a while to figure this out).

Worse, it was unstable as hell. I setup one just as a test, with one laptop connected via ethernet. Every couple days I wouldn’t be able to even ping the laptop - I’d have to reboot the router, manually, since it had become unresponsive.

This with a simple config (just eth2 is LAN, eth1 is external), and no rules.

It may have been a faulty unit, but as a consumer I can’t risk assuming this, especially given the very poor docs and clumsy UI/config approach - it all indicates this is a very immature product, definitely not something I’d recommend to a newbie.

I hope they can really improve - the form factor is excellent, the price point is unbeatable, the capabilites of the hardware are extensive.

port scanning is not authorized traffic

Hahahahahaha

And?

So what card are you using?

50TB?

Dang, thought I was doing well at about 5TB,haha

I have never once (unintentionally) superheated water in a microwave, and I’ve been using them since about 1980 (and God knows we were idiots with them back then).

It just doesn’t happen - there are too many imperfections in our containers, and too many minerals for it to happen much.

I’ve experimented many times, and the reality is you have to work at superheating water in a microwave.

For me, it’s taken things like a brand new Pyrex measuring cup (glass), and filtered water. I can do it with other stuff, but I’ve had to boil/cool it multiple times, something that isn’t really going to happen.

But one more thing to own, store, manage, for a little convenience.

I can boil 2 cups of water in the microwave in 5 minutes. Or 4. Takes about the same amount of time.

120v vs 220v

Also tea, as in tea time. Americans don’t have this custom, so it’s not a big driver.

I was surprised to find a Jellyfin client for Samsung Tizen tv’s at all (despite it being a major brand) - I hadn’t considered this may be a client issue. I’ll take a look, thanks!

I’ve seen that error, so I re-encoded without subs. Now it says it’s transcoding because the device doesn’t support the codec, which I know isn’t correct.

Thanks!

It’s transcoding because Jellyfin decided it needs to transcode for some reason, frustratingly. I’ve converted to formats/codecs I know the TV supports, and yet Jellyfin still transcodes, with a message about the TV not supporting the codec (yet if I play the file on the TV from a thumb drive, it works fine with the crappy built-in media player). I’m using the Jellyfin client on the TV because it’s easy to install without a Samsung account, and I don’t think I can get Kodi on it (besides my experience with Kodi is not great, it’s sluggish on real hardware, I can only imagine how bad it would be on an underpowered garbage TV and I don’t know if a client exists).

From a bigger picture perspective, I think Jellyfin as a client will be better for my family. It’s a simpler interface with less to get them in trouble.

I’ll need transcoding for other/non-local devices anyway, so I still have to address the issue (annoying iPad for example).

If you have any advice about troubleshooting why it’s transcoding, I’m all ears. This is the first I’ve gotten Jellyfin to work after multiple attempts over the years, across multiple servers and clients, so my experience with it is limited. I’m just glad it works at all - it’s the first I’ve gotten to work other than Plex.

Thanks - at least now I know it shouldn’t be transcoding.

How much video is really needed for transcoding?

I ask because I need to get a video card for transcoding to a 65" 4k TV. I’m converting all my DVDs to MKV and using Jellyfin as my server and client. It transcodes lighter stuff fine (cartoons, old TV shows), but better movies get some artifacts that don’t occur if I have the TV play the same file from a thumb drive.

I’ve read Jellyfin’s recommendation, but it’s really just “use at least this video chipset”, not a particular card, so I’m trying to determine what card I should get.

Ok, this actually made me chuckle out loud.

You really nailed it

Oh god, P4? Yea, those were just 100 watt light bulbs.

All that power was a huge driver for me - my old desktop that I used as a server was pulling 120w constantly.

Now between the SFF and NAS it’s about 35w. That’s a significant difference, plus the office doesn’t get as hot.

And I’d love to run ZFS again, kind of hard to beat it for redundancy and failure resistance. Maybe the next NAS I build will be Proxmox again.

This is an excellent explanation. I’ve always wondered how it all worked, now I see the map data is separate from dynamic data.

Wish these mapping apps would explain that, so people would understand the apps are providing the updated/dynamic data with the map data coming from OSM.